b'Light Weight Belting Specification SheetCatalog # 103L Pulley Diameter, MinimumItem number: 50172Description:1 PUR X 35 MAT / LCWInternational Designation:E 7/1 U0/U35 Matte Blue AS FDA EU A) Normal Flex (5.00 mm) 0.1969 inB) Back Flex (20.00 mm) 0.7874 inConstruction:Compound Top Cover Blue PU Belt Strength:Top Cover Thickness (in) (0.35 mm) 0.0138 in Pull for 1% Elongation (7 N/mm) 40 lbs/sq inTop Cover Description MatteTop Cover Shore 85 ShA Splice Instructions:Compound Bottom Cover PU Impregnated Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 293 FBottom Cover Shore N/A Press Pressure (psi) 29 lbs/sq inNumber of Plies 1 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (0.95 mm) 0.0374 inUnit Weight- lb/PIW 0.0179 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 59 in Cross Rigid YesTemperature Range (F)- High 140 FTemperature Range (F)- Low -13 F Impression Top NoOil Resistant NoFire Resistant NoFDA Approved YesSpecial Characteristics:103L has an 85 Shore A matte finish blue PU cover that covers a broad range of applications from checkweighers to cooling tunnels.The cover has a silky feel that offers easy release of food products.103L complies with FDA and EU regulations for direct food contact.*****All Values are nominal and subject to change without notice.*****'