b'Light Weight Belting Specification SheetCatalog # 145A Pulley Diameter, MinimumItem number: 41964Description:3 Ply Poly CR103 Black PVC Matte C x Bare ASInternational Designation:E18/3 0/V10H Black Matte AS A) Normal Flex (120.00 mm) 4.7244 inB) Back Flex (200.00 mm) 7.8740 inConstruction:Compound Top Cover Black PVC Belt Strength:Top Cover Thickness (in) (1.00 mm) 0.0394 in Pull for 1% Elongation (18 N/mm) 103 lbs/sq inTop Cover Description MatteTop Cover Shore 85 Splice Instructions:Compound Bottom Cover Polyester Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process Double FingerBottom Cover Description Bare Press Temperature (F) 365 FBottom Cover Shore N/A Press Pressure (psi) 29 lbs/sq inNumber of Plies 3 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (3.80 mm) 0.1496 inUnit Weight- lb/PIW 0.0750 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 118 Cross Rigid YesTemperature Range (F)- High 176 FTemperature Range (F)- Low 5 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved NoSpecial Characteristics:#145A is a 3 Ply Black PVC monofilament belt with a hard durometer matte finish cover. Designed for optical sorting applications, #145A is also suitable for applications requiring an abrasion resistant belt cover.*****All Values are nominal and subject to change without notice.*****'