b'Light Weight Belting Specification SheetCatalog # 113D Pulley Diameter, MinimumItem number: 10756Description:2 Ply Poly CR97 Green PU Cx FI AS FDAInternational Designation:E17/2 U1/U10 Green AS FDA A) Normal Flex (29.97 mm) 1.1800 inB) Back Flex (49.78 mm) 1.9600 inConstruction:Compound Top Cover Green PU Belt Strength:Top Cover Thickness (in) (1.00 mm) 0.0393 in Pull for 1% Elongation (17 N/mm) 97 lbs/sq inTop Cover Description GlossTop Cover Shore 92 Splice Instructions:Compound Bottom Cover Green PU Foil YesBottom Cover Thickness (in) (0.10 mm) 0.0039 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 320 FBottom Cover Shore N/A Press Pressure (psi) 21 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (2.15 mm) 0.0846 inUnit Weight- lb/PIW 0.0350 lbs/PIWMaterial Between Plies PU Other:Maximum Width (in) 118 in Cross Rigid YesTemperature Range (F)- High 212 F High Heat NoTemperature Range (F)- Low -4 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:The 113D belt is one of a kind, specifically manufactured for Beltservice with a full 1.0 mm thick 92A durometer PU cover. This belt is excellent for automotive applications, stamping plants and especially eddy current belts. This belt is stocked at 118" wide for the eddy current belts over 100" wide.*****All Values are nominal and subject to change without notice.*****'