b'Light Weight Belting Specification SheetCatalog # 134SG Pulley Diameter, MinimumItem number: 10796Description:2 Ply Poly 65 Black PVC Sand Grit AS FRInternational Designation:EM12/2 0/V7 Black Sand Grit AS FR A) Normal Flex (44.45 mm) 1.7500 inB) Back Flex (88.90 mm) 3.5000 inConstruction:Compound Top Cover Black PVC Belt Strength:Top Cover Thickness (in) (0.70 mm) 0.0276 in Pull for 1% Elongation (11 N/mm) 65 lbs/sq inTop Cover Description GritTop Cover Shore 70 Splice Instructions:Compound Bottom Cover Polyester Foil YesBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description Bare Press Temperature (F) 330 FBottom Cover Shore 0.000000 Press Pressure (psi) 25 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (2.90 mm) 0.1142 inUnit Weight- lb/PIW 0.0614 lbs/PIWMaterial Between Plies PVC Other:Maximum Width (in) 84 in Cross Rigid NoTemperature Range (F)- High 180 F High Heat NoTemperature Range (F)- Low 20 F Impression Top YesOil Resistant NoFire Resistant YesFDA Approved NoSpecial Characteristics:This 2 ply multifilament belt is most commonly used for power turn applications. The 134SG demonstrates good rip, tear, elongation, and fastener holding capability. The combination of the sand grit impression and the ultra modified cover compound results in a long lasting gripping top cover that is designed for a various packaging handling applications. Having a low friction, static conductive bottom fabric is ideal for slider-bed applications.*****All Values are nominal and subject to change without notice.*****'