b'Light Weight Belting Specification SheetCatalog # 139A Pulley Diameter, MinimumItem number: 24230Description:NW 25 Black HCInternational Designation:NW 25 HC SF Black A) Normal Flex (38.10 mm) 1.5000 inB) Back Flex (76.20 mm) 3.0000 inConstruction:Compound Top Cover Polyester Fleece Belt Strength:Top Cover Thickness (in) (0.00 mm) 0.0000 in Pull for 1% Elongation (15 N/mm) 85 lbs/sq inTop Cover Description SmoothTop Cover Shore N/A Splice Instructions:Compound Bottom Cover Polyester Fleece Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process SkiveBottom Cover Description Non-Woven Press Temperature (F) 180 FBottom Cover Shore N/A Press Pressure (psi) 18 lbs/sq inNumber of Plies 1 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (2.60 mm) 0.1024 inUnit Weight- lb/PIW 0.0290 lbs/PIWMaterial Between Plies N/A Other:Maximum Width (in) 72 in Cross Rigid NoTemperature Range (F)- High 250 F High Heat NoTemperature Range (F)- Low 14 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved NoSpecial Characteristics:This belt is manufactured with a nonwoven construction that is highly conductive, wear and cut resistant, quiet running and offers a soft impact surface. Commonly used in automotive applications, mail and post sorting systems, airport luggage handling and distributions centers. This belt resembles a felt like construction suitable for conveying plastic parts or electronic components.*****All Values are nominal and subject to change without notice.*****'