b'Light Weight Belting Specification SheetCatalog # 108PLB Pulley Diameter, MinimumItem number: 50224Description:2PURX30MATI/PCWInternational Designation:E 0/2 U0/U3 Blue MT AS A) Normal Flex (10.00 mm) 0.3937 inB) Back Flex (2.00 mm) 0.0787 inConstruction:Compound Top Cover Blue PU Belt Strength:Top Cover Thickness (in) (19.35 mm) 0.7620 in Pull for 1% Elongation (8 N/mm) 46 lbs/sq inTop Cover Description MatteTop Cover Shore 85 Splice Instructions:Compound Bottom Cover Polyester Foil NoBottom Cover Thickness (in) (0.00 mm) 0.0000 in Splice Process FingerBottom Cover Description PU Impregnated Press Temperature (F) 310 FBottom Cover Shore N/A Press Pressure (psi) 29 lbs/sq inNumber of Plies 2 Note:Listed above is a guideline only.Every vulcanizer is different and will Anti Static Yes show different results.We recommend that you do a test splice with your press before attempting the actual belt splice.Overall Gauge (in) (1.45 mm) 0.0570 inUnit Weight- lb/PIW 0.0273 lbs/PIWMaterial Between Plies N/A Other:Maximum Width (in) 78 in Cross Rigid YesTemperature Range (F)- High 194 FTemperature Range (F)- Low -40 F Impression Top NoOil Resistant YesFire Resistant NoFDA Approved YesSpecial Characteristics:108PLB features a thicker urethane top cover that makes it ideal for our ProSeal edge cap process.The fabric of the belt is highly flexible and capable of navigating small pulley diameters.*****All Values are nominal and subject to change without notice.*****'